Combined car model 19-795 and 19-795-01


Specialised rail car intended for transportation, within 1520 mm gauge railways, of alumina in bulk with loading through upper hatches and gravitational unloading between rails through lower hatches, as well as for transportation of alumonium packaged pigs, T-shaped ingots and other loads requiring protection from atmospheric precipitation. Brakes - automatic pneumatic with separate bogie braking, manual parking. Running gear - two 2- axle bogies mod. 18-7055 type 2 (under GOST 9246-2013 / DSTU 7530-2014) or other interchangeable models of bogies type 2 (under GOST 9246-2013 / DSTU 7530-2014). Automatic coupler CA-3. The draft friction gear of increased power consumption of class T1.

TECHNICAL CHARACTERISTICS
Cargo capacity, t 64,0
Body volume for bulk cargo, m3 74,0
Body volume for tare cargo, m3 70,0
Freight car mass, t 29,1
Calculated load from wheelset on rail, kN (tf) 230,3 (23,5)
Freight car base, mm 11 500
Freight car length as per coupling axles, mm 16 620
Overall dimensions under GOST 1-ВМ
Quantity of hatches:
- loading
- unloading
3
6
Axle 18-7055
Design speed, km/h 120
Run between repair, km 210 000
Service life, years 26

Department for the sale of freight car building products: 

Contact numbers:

+38(0536) 76-90-82
+38(0536) 76-90-72

Email:

This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.

 Address:

39621, Ukraine, Kremenchug town, 139, Prikhodko Str.

We are on the map

 

Read 254 times